Rastatt Tunnel: Strict Demands placed on mechanized Tunnelling

The Rastatt Tunnel represents the core engineering structure in planning approval section 1.2 of the new/upgraded Karlsruhe–Basle rail route. It will be tackled from May 2016 using two hydro-shield tunnel boring machines (TBMs), each with an excavation diameter of 10.97 m. The two single-track, roughly 4270 m long tunnel tubes will be lined with 50 cm thick reinforced concrete segments. The shallow location of the tunnel with minimal overburdens of less than 4 m, the subsidence-prone infrastructure and the presence of buildings, quite apart from having to undertunnel the Federbach low-lying conservation area protected by a frozen cover, place high demands on the engineering and process technology. Undertunnelling the busy Rhine Valley Railway, secured in advance by a ring-shaped brine freezing zone over a distance of 205 m, represents a particularly sophisticated task.

Overview of the Overall Project and Targets

The new/upgraded Karlsruhe-Basle rail route is a part of the European freight corridor Rotterdam–Cologne–Basle–Milan–Genoa as well as the Paris–Budapest artery. The route between the Dutch ports and the Mediterranean is numbered among the Trans-European Networks (TEN), which have been accorded top priority by EU transport policy. In addition, the route represents the most important northern access for the new rail routes crossing the Alps (NEAT).

Once completed, the continuous four-track line between Karlsruhe and Basle will allow traffic to be...

Related articles:

Issue 2015-08 Germany

First Tunnel Boring Machine approved for Rastatt Tunnel

The first of two tunnel boring machines (TBMs) for the Rastatt Tunnel by manufacturer Herrenknecht was approved by the customer, the Tunnel Rastatt JV, on December 8, 2015 at the factory in Schwanau....

more
Issue 2012-08 Germany

Financing of Rastatt Tunnel

The urgently needed upgrading of the Rhine Valley rail route is forging ahead. The Federal Ministry for Transport, Building and Urban Development and the Deutsche Bahn AG have reached agreement on...

more
Issue 2017-06 Germany – Rastatt Tunnel

Rheintalbahn Closure lifted on 2 October

On the morning of 12 August 2017, water and earth collapsed into the east bore of the Rastatt Tunnel in the course of construction works. The permanent way and tracks of the Rheintalbahn (Rhine valley...

more
Issue 2014-08 Germany

Rastatt Tunnel commissioned

The Rheintalbahn (Rhine Valley Railway) is one of Germany’s busiest rail routes. It is extended on to four tracks mainly for the requirements of freight traffic running between the container ports in...

more
Issue 2017-03

Glass Fibre Reinforcement at the Rastatt Tunnel

The line being newly built and upgraded between Karlsruhe and Basel is part of the European rail network from Rotterdam to Genoa. Running from the ports of the Netherlands to the Mediterranean, this...

more