HAHN Kunststoffe GmbH

HAHN Kunststoffe GmbH, an internationally operating company, produces stacking blocks made of recycled plastics for the storage of tubbing segments and other concrete parts. The material hanit® is extremely resilient and durable. Drying cracks and spiral growth, which often occur when using stacking blocks made of hardwood, are a thing of the past with hanit® tubbing blocks.

STUVA Expo 2021 | Halle 1, Stand B109

Related articles:

Issue 2017-06 Hahn Kunststoffe

Segment Storage

The same applies for every tunnel project: segments must be at the right place at the right time. Towards this end, special demands are posed on the transport and storage of these weighty concrete...

Issue 2014-04

Segments under Control: Production, Installation and Storage

The Koralm Tunnel KAT2 Project The Koralm Tunnel is a central project for the ÖBB-Infrastruktur AG on the Baltic-Adriatic rail route. The altogether 32.8 km long tunnel links Styria with Kärnten in...

Issue 2011-03 Herrenknecht Formwork Days 2011

All around Concrete Segments

New trends in the field of tunnel lining were discussed on the 3rd and 4th of March, 2011 in the Europa Park in Rust. Designers, representatives of construction companies and precast concrete segments...

Issue 2021-03 Sealable Solutions

New Groove Geometry to Prevent Concrete Spalling on Segments

It is generally known that the design of segments tends to become thinner and thinner due to cost, handling and environmental aspects. Consequently, the contact area between the segment rings is also...